The B2800 is an advanced microprocessor-based flow monitor that is also low cost and simple to operate. When ordered with a Blancett turbine meter, the B2800 is configured at the factory for units of rate and total. Or, the unit may be easily programmed in the field. The monitor has a large two-line display and is available in power and mounting options to suit almost any application.

Click here to download the Model B2800 Technical Data Sheet (974 KB pdf).

Loop-powered:	Two-wire, 4-20 mA output, 30 VDC maximum
Battery:	One"D"-size 1.5 VDC alkaline battery provides up to 3.5 years of service

Meter Mount:	Mounted directly on top of the flow meter
Remote Mount:	Connected to the meter via cable, up to 100 feet (30.5 meters)
Swivel Mount:	Bracket between B2800 and flow meter allows 180° adjustments
Portable:	Portable version includes handle and magnetic pickup
Panel Mount:	Fits 3.6" x 3.6" (91mm x 91mm) control panel cut-out
Explosion-proof:	CSA-approved enclosure for hazardous locations

Standard:	Displays in four selectable units of measurement and total: GPM/Gallons, LPM/liters, M3PD/cubic meters, or BPD/barrels
Advanced:	User-selected units for rate:
		Gallons, oil barrels, cubic feet, liters, cubic meters, MGal, MLiters, Acre Ft, Liquid Barrels, Lbs., Kgs.
	User-selected units for time:
		Day, Hour, Minute, Second
	In addition, the advanced version offers the capability for in-field calibration of the flow meter, up to 10 data points.

CSA Intrinsically Safe:	Class I, Division 1, groups C&D Class II, Division 1, Groups E, F & G (note: does not apply to panel mount model)
CE:	IEC 61326-1
CSA Explosion-Proof:	Class I, Division 1, Groups B, C & D Class II, Groups E, F, & G Class III, Type 4X, T6 @ 70 °C (note: applies to explosion-proof model only)