The Blancett Frequency-to-Current (F-to-I) and Frequency-to-Voltage (F-to-V) converters are microprocessor-based devices designed to provide an analog output directly from a Blancett turbine flow meter.  The converters measure and calculate the flow rate of a turbine flow meter and produce an analog output representative of that flow rate, in the form of a 4-20 mA or 0-5 VDC signal.  If a converter is ordered with a flow meter, the two components ship from the factory calibrated as a system.  If the converter is a replacement, the turbine meter's K-factor has changed, or the converter is being used with some other flow meter, then re-programming is possible with an optional Windows^®-based software utility.  The F-to-I and F-to-V converters were designed for use with Blancett flow meters, but in many cases they may be configured for use with other turbine meters.  Please consult factory for details.

Click here to download the F-to-I/F-to-V Technical Data Sheet (932 KB).

Power Supply:	Loop-powered 6 volt maximum insertion loss
Power Consumption:	25 mA maximum
Frequency Range:	0-3500 Hz
Analog Output:	4-20 mA
Operating Temperature:	-22 °F (-30 °C) to 158 °F (70 °C)

Power Supply:	10-30 VDC
Power Consumption:	10 mA maximum
Frequency Range:	0-3500 Hz
Analog Output:	0-5 VDC
Operating Temperature:	-22 °F (-30 °C) to 158 °F (70 °C)

Windows is a registered trademark of Microsoft Corp.